Wide Compatibility – Go Kart torque converter kits are widely used in go karts, mini bikes, small vehicles, riding lawnmowers, small tractors, mini copters, motorcycles, ATVs, suitable for all engines with a 1 inch straight crankshaft. Replaces Comet, also fits Manco Go Karts. Powerful Function – This torque converter driver clutch bore: 1″(24.5mm), you can choose 10 tooth sprocket 40/41/420 chain or 12 tooth sprocket for 35 chain(10 tooth sprocket has been installed). Use with a small engine that produces 2.5-8HP to make your off-road machine more dynamic. Outstanding Performance – The 30 Series torque converter acts like a gearbox, allowing your small engine to obtain higher speeds and achieve smoother acceleration. This clutch kit will help you get more power from a small engine by reducing the engine load, allowing you vehicle to start faster and drive more efficiently. Direct Replacement – 1″ Torque Converter Kit is a direct replacement, suitable for Comet 219554A, 218353A, 219552A, 219456A, 217610A, 203814A TAV2 30-75 & Yerf Dog Drive Unit Q43201W models. Package Includes – 1 x 1″ Driver Pulley; 1 x 5/8″ Driver Pulley; 1 x 10 Tooth Sprocket for #40/41/420 Chain; 1 x 12 Tooth Sprocket for #35 Chain(Chain not included); 1 x Plastic Cover; 1 x Aluminum Mounting Plate; 1 x Drive Belt; 1 x Full Mounting Hardware. As the picture shows.
30 Series Torque Converter Kit This is a market replacement for the Comet TAV2 torque converter kit. Designed for wake wrenches with engine sizes 2.5hp to 8hp. The kit comes with two sprockets, a 10 tooth sprocket for #40/41 chain and a 12 tooth sprocket for #35 chain. RYANSANS’s go kart torque converters are widely used in karts, CVT gearboxes for karts, mini bike, riding lawnmowers, small vehicles, small tractors, mini choppers, motorcycles, scooters, golf karts, odyssey, ATVs, etc. Made of high-quality iron and aluminum materials, maximum torque, fast heat dissipation, sturdiness and durability, the asymmetric design of drive clutch makes your off-road machines come alive. RYANSANS’s 1″ Torque Converter is your best choice!
Complete Go Kart Torque Converter Kit You will Get 1 x Plastic Cover 1 x 1″ Driver Pulley 1 x 5/8″ Driven Pulley (6″ Diameter) 1 x 10 Tooth Sprocket for #40/41/420 Chain 1 x 12 Tooth Sprocket for #35 Chain 1 x Aluminum Mounting Plate 1 x Mounting Hardware Kit 1 x Drive Belt Specifications Drive clutch bore: 1″(25.4mm ) Driven unit: Diameter 6″ (5/8″ driven pulley) Engagement range: 2350??200 RPM Engine horsepower: 2.5HP-8HP Cogged belt: Asymmetrical type
Go Karts 30 Series Torque Converter Fits all engines with a 1″ Straight Crankshaft, including Briggs, Honda and Clones, Clinton, Kohler, Lifan, Robin and Tecumseh motors.
Easy to Install For convenience, #40/41 chain 10-tooth sprocket and 5/8″ driven pulley have been installed on the Aluminum Mounting Plate.
Size Detail Length: 70.5cm / 27.76″ Width: 3/4″(1.9cm/0.75″) Outside Circumference: 27 23/64″ Center to Center of driver & driven: 6-15/16 to 7″
Replace Part Numbers Comet 219552A & Comet 219554A Comet 203814A & Comet 217610A Comet 218353A & Comet 219456A TAV2 30-75 & Yelf Dog Drive Unit Q43201W
Advantages Compared with a centrifugal clutch, the torque converter helps you get more power from a small engine by reducing the engine load, allowing your kart to obtain higher speeds and achieve smoother acceleration.
Function In loose soil, single wheel traction will easily slip. The hydraulic torque converter enables both wheels of your vehicle to rotate at the same time, providing twice the traction, and is your best choice for climbing and racing.
Installation Steps Step 1: Remove the old clutch kitStep 2: Use four M8*25 screws to fix the bracket to the four standard threaded holes of the engine crankcase. If necessary, the stand can be rotated up or down.Step 3: Disconnect the chain at an appropriate length to bypass the sprocket on the T.A.V and the final drive sprocket. Join the chain through the main link. Move the engine forward or backward to obtain the correct tension.Step 4: Place the washer (provided with the kit) on the crankshaft to align the driving clutch with the driven unit.Step 5: Separate the driver and place the flat pulley on the crankshaft. Slide the belt over the uprights of the driven device and the drive device. Install 4 spline hubs “D” on the outside. (Important: Make sure the bronze idler bushing on TAV 30-75 is in place. Not required for TAV 30-100.)Step 6: Place the other half of the drive unit on the crankshaft. Align the outer cover with the “D” part of the hub, and install the fixing bolts and washers.
1″ Torque Converter Comet Clutch
3/4″ Forward Reverse Gearbox Kit
Go Kart High Performance Carburetor Kit
Forward Reverse Gearbox Kit
Drive Clutch Bore
1″(25.4MM) 3/4″(19MM) Not Applicable Not Applicable
Driven Unit
Diameter 6″ (5/8″ Driven Pulley) Diameter 6″ (5/8″ Driven Pulley) Not Applicable Diameter 6″ (5/8″ Driven Pulley)
Sprocket teeth
10 Tooth #40/41/420 Chain and 12 Tooth #35 Chain 10 Tooth #40/41/420 Chain and 12 Tooth #35 Chain Not Applicable 10 Tooth #40/41/420 Chain and 12 Tooth #35 Chain
Engagement range
2350??200 RPM 2350??200 RPM 2350??200 RPM 2350??200 RPM
Recommended engine
2.5HP-8HP 2.5HP-8HP 6.5HP 2.5HP-8HP
Belt
Asymmetrical Type Asymmetrical Type Not Applicable Asymmetrical Type